Engineering Department

Our engineering department is responsible for analyzing and validating your projects.

If your helical pile project has to comply with our CCMC Evaluation Report, Techno Metal Post’s engineering department can accompany you in the validation process of your project. To do this, the engineers will check the type and quantity of piles required according to the loads to be supported and the characteristics of the soil in which they are to be installed. A certificate which confirms that the pile installation is compliant will then be issued.

DFI-logo-RGB

Techno Metal Post engineers possess the mandatory requirements to issue compliance documents in every Canadian province where our products are available. Techno Metal Post is also an active member of the Deep Foundations Institute (DFI).

 

 

Canada

Pascal Marceau, P. Eng.

  • Responsible for calculating the load capacity of Techno Metal Post helical foundations
  • Author of “The Canadian standard for screw piles”
  • Global expert in the field of screwed foundations
  • More than 22 years of experience in civil engineering
  • Member of the OIQ, PEO, APEGA, APEGBC, APEGS, APEGNB, APEGM, PEGNL, APENS, APEPEI

Jérôme Chabot, P. Eng.

  • Responsible for calculating the load capacity of Techno Metal Post helical foundations.
  • Research and development of various tools for validating the load capacity of Techno Metal Post helical piles
  • Contribution to the drafting of the Evaluation Report for the U.S. standard (ICC AC 358)
  • More than 10 years of experience in civil engineering.
  • Member of the OIQ, PEO, APEGA, APEGBC, APEGS, APEGNB, APEGM, PEGNL, APENS, APEPEI

Raphaël Vachon, P. Eng.

  • Responsible for calculating the load capacity of Techno Metal Post helical foundations
  • More than 3 years of experience in civil engineering
  • Member of OIQ, APEGNB, APEGM, PEGNL

Valérie Groleau, P. Eng.

  • Responsible for calculating the load capacity of Techno Metal Post helical foundations
  • More than 10 years of experience in civil engineering
  • Member of the OIQ, PEO, APEGA, APEGBC, APEGS

 

États-Unis

Michael Hutsenpiller, P. Eng.

  • Responsible for calculating the load capacity of Techno Metal Post helical foundations
  • Senior Engineer for Techno Metal Post U.S. since 2005
  • Specialist in structural, architectural and foundation design
  • More than 35 years of experience in civil engineering

 

Bureau d’études – Europe

Stéphane de Franssu, P. Eng.

  • In charge of design calculations
  • Over 15 years experience in the industry and in construction
  • Over 10 years experience in helical pile foundations
  • Graduate of l’Institut Catholique des Arts et Métiers de Lille (1993)
  •  

Sébastien Planquart, P. Eng.

  • In charge of design calculations
  • Specialist in geotechnology
  • Over 5 years experience in geotechnical study
  • Graduate of l’Université de Bordeaux (2012)