Support for Concrete Foundations

Techno Metal Posts are installed beneath the structure to support its loads. They are screwed into the ground and secured to the reinforcement before the concrete is poured. During installation, the bearing capacity of each pile is measured in real-time.

The engineering team determines the exact depth for each pile to safely support the structure and ensure the required bearing capacity is achieved.

This approach ensures a solid foundation in challenging conditions, like areas with weak or unstable soil.

A plate is welded on each pier and secured to the reinforcement. We offer different types of plates and can adapt them to your needs.

Techno Metal Posts are installed under the structure to support the sill and distribute its forces. Our engineering team determines the exact position and depth for each pile based on load requirements, and then the piles are screwed into the ground until they reach the specified bearing capacity. Once in place, the reinforcement is secured to the welded support plate, and concrete can be poured.

In the case of prefabricated stringers, the piles are placed between each stringer. The torque of each pile is determined according to the forces of the sill needing support.

The engineering department calculates all loads, and each pile is equipped with a welded plate and concrete reinforcement to firmly support the sills.

Techno Metal Post's engineering department is responsible for the analysis and validation of your projects. Our engineers will determine the type of piles to be installed based on the loads to be supported and the soil characteristics. They can issue a certificate of compliance and guarantee the work in accordance with current standards.