Project Type
Helical pile foundations for a solar structure on a vineyard site
Location
Losone, Canton of Ticino, Switzerland
Challenges
The project involved installing a solar structure on a site of approximately one hectare, with vines planned between the different rows of piles.
The main challenge was the particularly rocky ground, which made pile installation difficult. Although the use of custom-made metal components allowed for some flexibility in pile positioning, certain large rocks still had to be excavated to allow the piles to be installed correctly.
Extensive preparation was therefore required ahead of the project, in collaboration with the engineering department and the dealer, to assess the site conditions and determine the most suitable installation approach.
Solutions
The installation was carried out using a TM1 machine. A total of 204 helical piles were installed at a depth of 2 metres, including 120 P3 piles and 84 P2.5 piles.
To facilitate the assembly of the solar structure, custom-made U-shaped steel components were manufactured and welded to the pile plates after installation. This solution provided greater flexibility in positioning and helped accommodate any alignment differences.
Result / Conclusion
The project was completed within one month, despite the challenging ground conditions.
This project highlights the ability of Techno Metal Post helical pile solutions to adapt to difficult ground conditions through careful planning and tailored technical solutions.
It also demonstrates how solar energy production and vineyard cultivation can coexist on the same site, with vines growing between the rows of piles.
Additional Information
Techno Metal Post Dealer: Techno Metal Post Vaud