If you are budgeting for a construction project in Canada (perhaps a deck, an addition, a house, or a commercial building), you might be exploring the average cost of a screw pile foundation. This guide explains how pricing is calculated, which factors affect the final cost, and how to compare helical piles with concrete foundations.
How is the cost of a helical pile calculated?
Techno Metal Post helical piles are priced per unit, and the total cost depends on the number of piles required for your project. Three technical factors determine the final price:
1 - The Type of Structure Needing Support
A lightweight deck and a two-story building require different support. Techno Metal Post helical pile models P1 through P5 (and above) are selected based on the project's load requirements. The heavier the load is, the larger the diameter and length of the pile will be, and consequently, the higher the cost.
2 - The Depth of the Load-Bearing Soil
Across Canada, the depth of stable load-bearing soil differs greatly from region to region. There are areas where that bearing soil layer may be much deeper than in rocky terrain. Each additional depth layer will require extending the piles, which directly affects the price per pile. Generally speaking, for small projects such as a deck or a home addition, a 7-foot or 10.5-foot pile is sufficient to meet the required bearing capacity.
3 - Soil Density
Depending on the soil's density (for example, locations near water or in low-bearing capacity soil), helical piles with a larger-diameter helix may be necessary. Because these piles are equipped with larger helices, they will cost more than the smaller diameters.
What is the cost range for your project type?
Every project is unique, but generally, the type of structure needing support will determine an initial budget estimate. The guide below will help you get a general idea of typical costs before receiving a formal quote.
| Project Type | Complexity / Scale | Relative Costs |
|---|---|---|
| Deck / Porch / Patio area | Low load & few piles | Base cost |
| Addition / Solarium | Moderate load | Intermediate cost |
| Garage / Shelter space | Moderate load | Intermediate cost |
| House / Cottage | High load | Higher cost |
| Commercial structure | High load, depending on the structure | Higher cost |
Note: These cost estimates are for reference only. The only way to obtain an accurate price for your project is to request a quote from the Techno Metal Post dealer in your region.
Screw Pile Foundations vs. Concrete Foundations: A Real Cost Comparison
Comparing only the listed price is a common mistake. What matters is the overall cost of the project.
| Steps | Techno Metal Post Helical Piles | Concrete Foundation |
|---|---|---|
| Excavation | None | Yes - additional cost |
| Formwork and concrete | None | Required - additional cost |
| Curing time | None | Several days required |
| Site restoration | None | Yes - additional cost |
| Total project cost | Comparable, but often lower | Often higher |
Throughout Canada, the overall cost of helical piles for most residential projects is often lower when compared to that of a concrete foundation.
What's Included within the Techno Metal Post Cost?
A Techno Metal Post estimate includes several factors that are not always outlined in competitors’ quotes.
Here’s what’s included:
In-House Engineering Services
Upon request, permit application documentation and a conformity report can be provided (a minimal fee applies). The technology is CCMC-certified (report 13059-R), meeting the standards required by many municipalities.
Exclusive Technology
- The exclusive green sleeve allows for natural soil movement caused by freeze/thaw cycles without causing any uplift forces on the piles or the structure.
- Corrosion protection personalized to your soil conditions includes extra-thick steel walls and hot-dip galvanizing to ensure long-term durability.
A Guaranteed and Measured Load-Bearing Capacity
The driving torque is measured in real time during installation. This means the precise load capacity of each pile is confirmed, and there is no guessing.
Frequently Asked Questions About the Cost of Techno Metal Post Helical Piles
Does the price vary by region?
Yes, slightly. Soil conditions vary from one location to another, affecting pile depth and, as a result, the price. An on-site visit or your project plans will help us provide a better estimate based on your specific area.
Can we get a quote without a site visit?
In many cases, a preliminary estimate can be prepared remotely. For an accurate price, though, an on-site visit or project plans are required.
Is installation more expensive in the winter?
Yes, it can be. Although screw piles can be installed year-round, even in frozen ground, additional costs may apply under these conditions.
Is it more expensive if there is bedrock on my property?
Not necessarily. If the bedrock is deep enough, the pile will be supported by it. If it's near the surface, specialized anchoring systems can be used as another solution.
Ready to budget for your project?
Get a free quote from your nearest dealer across Canada.
Find Your Local Installer Here
Want to start with the basics? Visit our FAQ: How much do helical piles cost?
